Landa Vehicle Pre-Soak

Vehicle Pre-Soak is used to remove stubborn soils like bugs, tar, oil and grease deposits on vehicles. It’s applied before washing in order to penetrate and break up soils and washed away when the rest of the vehicle washing is done. The more time you allow to soak, the less scrubbing is required. Vehicle Pre-Soak is safe to use on fine auto finishes and strong enough to work on transportation fleet vehicles.

• 1:60, 5 gallons makes 305 gallons

To Apply: Apply before vehicle washing to loosen soils Apply Pre-Soak from the bottom up and allow to penetrate, but not dry. Then apply vehicle wash detergent from the bottom up and rinse from the top down.

Directions: INDUSTRIAL USE ONLY. Read the Safety Data Sheet thoroughly before using this product. Meter one part Vehicle Pre-Soak with up to 60 parts water (pH at use dilution: 10.2). For heavy soil meter at 1:40. Apply or foam onto soiled vehicle areas. Allow to penetrate for 1 to 2 minutes. Then wash vehicle with a vehicle wash detergent as normal.

• Reduces Manual Scrubbing
• Save Time
• Environmentally Friendly - Phosphate Free

• Color: Blue
• Scent: Citrus
• Foam 1-5: 5 = High
• Reaction in Hard Water 1-5: 4 = Good
• pH at Full Strength: 12.8
• pH at Use Dilution (1:60 Ratio): 10.2

5 Gal 8.698-223.0

55 Gal 8.698-224.0