Heavy Duty Brown Degreaser is an aggressive detergent used to clean machinery and equipment to remove heavy daily debris of oil, light grease, sand, mud and road film. This detergent is safe to use on most heavy equipment however, due to its strength to handle heavy soils, it should not be used on aluminum, magnesium or fine paint finishes.

• 1:50, 5 gallons makes 255 gallons

To Apply: Spray diluted solution on surface and allow to penetrate, but not dry. Apply detergent from the bottom up and rinse from the top down.

Directions: INDUSTRIAL USE ONLY. Read the Safety Data Sheet thoroughly before using this product. For general use, mix with water at a 50:1 dilution rate (pH 11.8 at dilution). Adjust dilution depending on severity of cleaning situation. Pre-treat stubborn areas with a concentrated solution. Less detergent is needed when applied with a hot water pressure washer.

• Industrial Strength
• Superior Grease and Oil Removal
• Environmentally Friendly - Phosphate Free

• Color: Dark Brown
• Foam 1-5: 5 = High
• Reaction in Hard Water 1-5: 5 = Best
• pH at Full Strength: 13.3
• pH at use Dilution(1:50 ratio): 11.8

5 Gal 8.698-201.0

55 Gal 8.698-202.0